The production of chuck gearwheels is opened by Oerlikon method from 1 module up to 14 modules up to max. Ø800 mm diameter. After testing and lapping process, it is re-acclimatized with special pastes for silent operation and leplenmekt.In a mirror mahrüti gear box, the spiral angle of the pinion is greater than the spiral angle of the gear, thus, the pinion diameter may be greater than that of a bevel gear pinion. This provides more contact area and more tooth strength; this allows more torque transmission and higher gear ratios (up to 200: 1).
1-First, it increases the flexibility of a machine design, because the axis can be extended in both directions and the axis height can be freely adjusted to some degree.
2-Secondly, the diameter of the pinion can be expanded because the spiral angle of the pinion is greater than the spiral angle of the gear. As a result, the power of the tooth increases and its life is increased several times.
3-Third, the number of teeth can be reduced due to the high contact rate. As a result, you can choose a speed ratio that is higher than the bevel gear.
4-Fourth, a satisfactory lubrication condition is ensured, because the sliding feature can be achieved at every point.
1-Design and manufacturing requires high technology, this is the price of manufacturing.
2-Gears are fully coiled because of the special quality and high-pressure lubrication is required.
Mirror gears are used in gear units and automotive industry. However, it is also useful for low-speed applications that require extreme motion smoothness or quiet operation. In multi-stage gearboxes, mirror gears are often used for the output phase where low speed and high torques are required. The most common application for horizontal gearboxes is the automotive industry in which the rear axles are used, especially for large trucks.
Yilmaz Gear fasteconomicprofosyonel offers solutions.
